Netgear WNCE3001 Driver Software Download

Netgear WNCE3001 Driver Software Download – Contrasted to a conventional WiFi dongle, the WNCE3001 wireless adapter is quite gigantic, determining 8cm x 6cm x 2cm. It’s wedge designed as well as made from gloss black plastic, which right away reminds you of the monolith in “2001: A Room Odyssey”. In an odd design choice, Netgear has decided to place the adapters on the bottom, which precludes you from standing it upright unless you utilize the offered stand. Nonetheless, this stand just makes the adapter even more significant, now clocking in at sizable 10cm high; however, because of an absence of weight, this setup makes it somewhat unstable.

At the top, behind a grille, there is a LED light that is made use of to indicate the adapter’s condition, and also, as discussed previously, at the bottom are the links. There are a 10/100 Mbps Ethernet port for linking the adapter to AV tools, along with a mini-USB connector for offering the adapter with power. If the AV gadget that you are connecting to has a USB outlet, you can power the adapter this way, or conversely, you use an offered USB plug. Ultimately, at the bottom, there is a pin opening for executing a factory reset, and also, the WPS chooses to switch.

In terms of requirements, the WNCE3001 is a Dual-Band Wireless Net Adapter that uses the most recent 2.4 or 5 GHz standards to provide the best working range. It will deal with either a solitary bank or dual-band cordless network and also uses the IEEE 802.11 n v2.0 standard, which supplies you with networking rates virtually six times faster than 802.11 g and is backward-compatible with the 802.11 b/g networking standard, permitting you to carry out faster wireless innovations in a mix with existing 802.11 b/g WiFi networks. The WNCE3001 adapter can deal with any system allowed device with an Ethernet port, and also it is compatible with Net Explorer 6.0, Firefox 2.0 or Safari 1.4, or higher, for software application configuration. The included Ethernet port is 10/100 Mbps, as well as the WNCE3001 consists of WiFi Protected, Gain access to (WPA2-PSK, and also WPA-PSK) as well as WEP data encryption.

We connected the WNCE3001 to our cordless network and began running some examinations as well as total the adapter performed very well. While it can deliver speeds higher than 100 Mbps, it’s worth bearing in mind that the WNCE3001 only has a 10/100 Ethernet port, so its maximum speed will undoubtedly be limited to 100Mbps. To be straightforward, this shouldn’t be an issue because the devices you will certainly be attaching the WNCE3001 to are most likely going to be TVs as well as Blu-ray players that do not have integrated WiFi. These gadgets don’t tend to utilize a lot of bandwidth, so 100 Mbps ought to be more than enough. The only exemption could be game gaming consoles and particularly online gaming, although even after that, 100 Mbps should be sufficient given the majority of people’s net speeds.

Specification

GENERAL

• Device Type
  Bridge
• Frequency Band
  2.4 GHz / 5 GHz
• Encryption Algorithm
  WPA-PSK, WPA2-PSK, WEP
• Manufacturer
  Netgear

NETWORKING

• Form Factor
  desktop
• Type
  bridge
• Connectivity Technology
  wired, wireless
• Data Link Protocol
  Ethernet, Fast Ethernet, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
• Features
  Push ‘N’ Connect button, USB powered, WiFi Protected Setup (WPS), firmware upgradable, reset button
• Compliant Standards
  IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, Wi-Fi CERTIFIED
• Wireless Protocol
  802.11a/b/g/n
• Data Transfer Rate
  300 Mbps

Netgear WNCE3001 Driver Software Download

Firmware
Version: 1.0.0.50
File size: 1.52 MB
Download

Firmware
Version: 1.0.0.46
File size: 1.52 MB
Download